Dwyer MPCJR - Manual (Page 11)

Security Level Selection
Three levels of security are provided. The SECr menu item security level may be
viewed or changed at any time regardless of the present security level in the Secure
menu. The display shows the current security level. To change security levels
change the password value using the UP ARROW or DOWN ARROW
keys and pressing the ENTER key. Refer to the password table (following) for
the correct value to enter for the security level desired.
To set the access level to, for example, 2, at the SECr menu item press the
UP ARROW key until the upper display shows the password, 1101. Press the
ENTER key. The display will blink, and return with the level value, 2, in the
upper display.
The password values shown in the table cannot be altered. Retain a copy of these
pages for future reference. This is the only reference made to password values in
this instruction book.
Password Table
10
Menu
Secondary
Secure
Secondary
Secure
Secondary
Secure
Security Level
Status
Locked
Locked
Unlocked
Locked
Unlocked
Unlocked Display Value
When Viewed
2
3
4
Password Value
to Enter
1101
1011
111