Milestone XProtect Enterprise 2014 - Manual (Page 134)

Milestone XProtect ® Enterprise
2014
Administrator's Manual
www.milestonesys.com 134 Advanced configuration
Name Description
Archiving Times
Specify when you want XProtect Enterprise to automatically move
recordings to your archiving path(s). You can specify up to 24
archiving times per day, with minimum one hour between each one.
Select the hour, minute and second values and click the up and
down buttons to increase or decrease values, or simply overwrite
the selected value, and then click Add. The more you expect to
record, the more often you should archive.
Send e-mail on archiving
failure
If selected, XProtect Enterprise will automatically send an e-mail to
selected recipients if archiving fails. This requires that the e-mail
notification feature is enabled. Recipients are defined as part of the
e-mail notification properties (see "Email (Properties)" on page
144).
Properties available in XProtect Enterprise and XProtect Professional only:
Send SMS on archiving failure
Select if the system should automatically send an SMS if archiving
fails. You define the recipients of the SMS notifications as part of
the SMS notification configuration.
The setting is only available if you have enabled SMS notifications.
Properties available in XProtect Enterprise only:
Archive on event
If selected, your system starts archiving when a certain event
occurs. Select the event from the list.
Camera-specific scheduling properties
Online period
When you configure scheduling (see "Configure camera-specific schedules" on page 67) for specific
cameras, your Online Period settings are probably the most important, since they determine when
each camera should transfer video to XProtect Enterprise.
By default, cameras added to XProtect Enterprise are automatically online, and you only need to
modify the online period settings if you require cameras to be online only at specific times or events.
Note, however, that this default may be changed as part of the general scheduling options (see
"Scheduling options" on page 133), in which case cameras added at a later time are not automatically
online.
The fact that a camera transfers video to XProtect Enterprise does not necessarily mean that video
from the camera is recorded. Recording is configured separately, see Configure video and recording
(see "About video and recording configuration" on page 64).