Milestone XProtect Enterprise 2014 - Manual (Page 153)

Milestone XProtect ® Enterprise
2014
Administrator's Manual
www.milestonesys.com 153 Advanced configuration
You can refine the configuration in the Management Client.
Access control properties
General Settings tab (Access Control)
Name Description
Enable
Systems are by default enabled, meaning that they are visible in
XProtect Smart Client for users with sufficient rights and that the
XProtect system receives access control events.
You can disable a system, for example during maintenance, to
avoid creating unnecessary alarms.
Name
The name of the access control integration as it appears in the
management application and in the clients. You can overwrite the
existing name with a new one.
Description
Provide a description of the access control integration. This is
optional.
Integration plug-in
Shows the type of access control system selected during the initial
integration.
Last configuration refresh
Shows the date and time of the last time the configuration was
imported from the access control system.
Refresh configuration
Click the button when you need to reflect configuration changes
made in the access control system in XProtect, for example you
have added or deleted a door.
A summary of the configuration changes from the access control
system appears. Review the list to ensure that your access control
system is reflected correctly before you apply the new configuration.
Operator login required
Enable an additional login for the client users, if the access control
system supports differentiated user rights.
This option is only visible if the integration plug-in supports
differentiated user rights.
The naming and content of the following fields are imported from the integration plug-in. Below are
examples of some typical fields:
Name Description
Address
Type the address of the server that hosts the integrated access
control system.
Port
Specify the port number on the server to which the access control
system is connected.