Milestone XProtect Enterprise 2014 - Manual (Page 138)

Milestone XProtect ® Enterprise
2014
Administrator's Manual
www.milestonesys.com 138 Advanced configuration
Name Description
Port
Specify the port number to be used when sending commands to the
Matrix recipient. Used when adding a new Matrix recipient or editing
the properties of an existing one. The Matrix recipient will listen for
commands on this port. By default, port 12345 is used; you can of
course specify another port number.
Password
Specify the password to be used when communicating with the
Matrix recipient. Used when adding a new Matrix recipient or editing
the properties of an existing one
Matrix-recipient is an XProtect
Smart Client
Select if the relevant Matrix-recipient is an XProtect Smart Client. If
you use XProtect Smart Client, distribution of Matrix-triggered live
video takes place slightly differently.
Clear Removes any content in the Name, Address, and Password fields.
Update
Updates the properties of the selected Matrix recipient with the
changes made during editing. Available only if you have edited the
properties of an existing Matrix recipient.
Add
Adds the new Matrix-recipient to the list. Available only if you have
added properties of a new Matrix-recipient in the Name, Address,
Port, Password, and possibly XProtect Smart Client fields.
Matrix event control
The Matrix Event Control tab is used to configure the automatic sending of live video based on
predefined events. You can define exactly which events and cameras to use on a per-Matrix recipient
basis. The Matrix Event Control tab displays the list of Matrix recipients defined on the Matrix
Recipients tab.
Right-clicking a Matrix recipient brings up a list of devices with belonging events. When you select an
event, it will initially be highlighted by a red exclamation mark, indicating that there is additional
configuration to be done. Right-clicking an event brings up a list of options for the selected event:
Component Requirement
Delete [selected event] Deletes selected event on the selected device.
Connect
Connects to the camera (actual camera is specified after selecting
action to be taken).