Milestone XProtect Enterprise 2014 - Manual (Page 154)

Milestone XProtect ® Enterprise
2014
Administrator's Manual
www.milestonesys.com 154 Advanced configuration
Name Description
User name
Type the name of the user, as defined in the access control system,
who should be administrator of the integrated system in XProtect.
Password Specify the password for the user.
Associated Cameras tab (Access Control)
Provides mappings between door access points and cameras, microphones or speakers. You
associate cameras as part of the integration wizard, but you can change the setup at any time.
Mappings to microphones and speakers are implicit through the related microphone or speaker on the
camera.
Name Description
Doors
Lists the available door access points defined in the access control
system, grouped by door.
Enabled: Licensed doors are by default enabled. You can disable a
door to free a license.
License: Shows if a door is licensed or if the license has expired.
The field is blank when the door is disabled.
Remove: Click Remove to remove a camera from an access point.
If you remove all cameras, the check box for associated cameras is
automatically cleared.
Cameras
Lists the cameras configured in the XProtect system.
Select a camera from the list, and drag and drop it at the relevant
access point to associate the access point with the camera.
Access Control Events tab (Access Control)
Event categories allow you to group events. The configuration of event categories affects the behavior
of access control in the XProtect system and allows you to, for example, define an alarm to trigger a
single alarm on multiple event types.
Name Description
Access Control Event
Lists the access control events imported from the access control
system. The integration plug-in controls default enabling and
disabling of events. You can disable or enable events any time after
the integration.
When an event is enabled, it is stored in the XProtect event
database and is, for example, available for filtering in the XProtect
Smart Client.
Source Type
Shows the access control unit that can trigger the access control
event.