Noby UK Noby-220iR2 2-Zone - Manual (Page 21)

Noby-220iiiiR2 Installation Manual Page 21 Software Revision1-0
- - -
Noby-220iiiiR2 User Operation
• The most commonly used functions are accessed by a simple one-touch key operation, whilst other
more safety critical functions are accessed via a longer key sequence.
• The acceptance of each command is confirmed with an audible double click.
• When entering the User Access Code, the green Power LED will flash rapidly for 5 seconds signifying
that the panel is ready to accept the Command Key.
One-Touch Key Momentary Press Press & Hold for 5 secs
Silence Panel
Re-sound / Evacuate / Sounder Test
activates sounders & relay
LED Lamp: On / Off
10min timer if 230VAC OK
60min timer if 230VAC absent
LED Lamp permanently on
i.e. not self-timed
no action
Disable Zone-1
self-timed 60mins
disabled when Z1 yellow LEDs = on
no action
Disable Zone-2
self-timed 60mins
disabled when Z2 yellow LEDs = on
User Access Code Command Key Action
Silence Main Sounders
or, if already silenced ...
Re-sound / Evacuate / Sounder Test
activates sounders & relay
Panel Reset
Permanently Disable or Re-enable
Zone-1 (Toggle on/off)
disabled when Z1 yellow LEDs = on
Permanently Disable or Re-enable
Zone-2 (Toggle on/off)
disabled when Z2 yellow LEDs = on
1 1 2
1 1 2
1 1 2 1
1 1 2 2