NORD Drivesystems BU0940 - Manual (Page 11)

2 Step 7 hardware configurator
BU 0940 GB-3612 11
2. Step 7 hardware configurator
The following descriptions apply to all the process and parameter modules listed in this manual.
Pos : 18 /Anl eitungen/ SPS - Baus tei ne/Har dwar ekonfigurat or STEP 7/H ardwarekonfigur at or Step 7 f ür PROF IBU S @ 1 \ mod_1338388519690_388.doc x @ 27001 @ 2 @ 1
2.1 Step7 hardware configurator for PROFIBUS
The bus participants are configured first. Configuration is performed by the following steps:
1. Configuration of the master for the module
2. addition of the master to a network
3. the required module is selected from the hardware catalogue and assigned to the
network.
Note
Care must be taken that the PPO type is correct when selecting the module from the
GSD file.
Pos : 19 /Anl eitungen/ SPS - Baus tei ne/Har dwar ekonfigurat or STEP 7/H ardwarekonfigur at or SK 2xxE [ PROF IBU S] @ 1\ mod_1338452884076_388. doc x @ 27031 @ 3 @ 1