NORD Drivesystems BU0130 - Manual (Page 9)

NORDAC SK DA-130E
BU 0130 DE techn. changes reserved 9
2 Functional principle
The field distributor module SK DA-130E is a combination of the full frequency inverter SK 300E and a platform
for additional interfaces and switching elements. The frequency inverter SK 300E is the basis for a wide range
of applications. Due to the high performance of this frequency inverter, applications of conveyor technology,
simple pump control, as well as complex lifting applications or process control can be realised.
This manual shows all the details of the distributor platform SK DA-130E. All additional components, such as
the frequency inverter SK 300E and its optional modules, as based on tried and tested components. As these
modules are optional, there are also separate operating instructions for these, which should be consulted in
any case. The relevant names are listed in German (additional languages on request):
Frequency inverter SK 300E BU 0300 DE
Technology box / Bus system
Profibus BU 0020 DE
InterBus BU 0070 DE
CANopen BU 0060 DE
DeviceNet BU 0080 DE
The SK DA-130E has high-performance connector terminals, as well as a detatchable flange, to which the
cable screw connections are mounted. This both applies to the power feed and for the outgoing energy in feed-
through technology. The motor output is external with a system connector, in this case Harting HAN 10E. Due
to this version, a fast exchange of this appliance is possible.
The M12 interface of this appliance is used as an interface for control signals in the form of M12 sockets, as
well as the activation of a reversing starter SK 160E. Signals of actuators can be received near the drive and
can be used for drive tasks or can be transmitted via the existing bus system for controlling duties. This
creates an ideal interface to the automation system by using the unit SK DA-130E. The reversing starter SK
160E can be realised via a 5-phase M12 connection.