NORSTAT Safety Relays - Manual (Page 8)

DEVICE SAFE C1
Safety controller for e-stop
APPLICATIONS and gate monitoring applications
APPROVALS CE, TÜV, UL, C-UL
CONTACTS 4 safety semiconductor outputs
LED indicators for status and supply diagnostic
SPECIAL CHARACTERISTICS Wearless contacts, "AND", "OR" functions between several SAFE C1
Automatic start possible
LED Power, channel 1 and channel 2 + flashing code
24 V DC ( + 25 - 20 % )
OPERATING VOLTAGE Overvoltage protection
POWER CONSUMPTION ca. 3 W
START UP DELAY / FALLBACK TIME < 70 ms / < 30 ms
CONTACT CAPACITY max. total current 1,8 A
CONTACT CAPACITY min. at 24V DC (*) infinite
SIMULTANEITY no (special variants possible)
ENVIRONMENTAL TEMPERATURE -25°C to + 55°C
SWITCHING CAPACITY up to 43 W
CONTACT SECURITY short circuit proof
OPERATING MODE
(*) We offer all devices who have a CONTACT
CAPACITY of min. 100 mA at 24 V DC with
hard gold-plated contacts. In this way the
CONTACT CAPACITY of min. 100 mA is only 4 mA.
Please ask our sales team!
CONNECTION DIAGRAM
2-channel e-stop application with monitoring of reset circuit, opposite
channels polarity and contact expansion.
The release button must be attached to the e-stop circuits (S11/S12,
S21/S22) and the start button must be attached to the reset-circuit (S34/A1).
The activation of the semiconductor safety outputs takes place after closing
of the reset circuit (pressing the start button).
By linkage more SAFE C1 with one another safety applications also
complicated, with which different components are to be differently
supervised, can be realized.
For monitoring of the external contactor, the NC contacts of the force guided
contactors must be attached in series to the reset circuit.
A1 + 24 V DC
A2 0 V DC
S35
S34 S22 S12 S11 S21 S32
S33 S36 S37 14 34
K1
K2
A2
K1
K2
K1
K2
Not-Halt
E-Stop
Start
FUNCTION CIRCUIT DIAGRAM
A1 A2
Power Input circuits
S12 S22 S34 S35 S36
Output
circuits
Combination
circuit
S11 S21 S33
MCU1
<Controller 1>
MCU2
<Controller 2> Sa
fe
ty ou
tp
ut
ci rc
uit
s
14
24
34
44
S32 S37
Certifications according to
Safety relevant substance data
Depending on wiring (only max. values are given)
EN ISO 13849-1/ EN 61508: PLe, Cat. 4 / SIL3
MTTFd: 163 years / high, DC: high, CCF: achieved
PFH: 2,87*10 -9 1 /
h
, PFD: 2,01*10 -6 1 /
h,
SFF: 0,9573
NORSTAT INC. 300 Roundhill Dr. Rockaway, NJ 07866 Tel: 973-586-2500 Fax: 973-586-1590 www.norstat.com