Brother HL-2170W User Manual
Page 257
CHAPTER 5 PJL - 53
Variables
Description
Sample Value Range
FONTSOURCE
Sets the font source to Internal fonts
or Permanent Soft Fonts
I or S (HL-1050/1070/1250/1270N/
1450/1470N/P2500/1650/1670N/
1850/1870N/5040/5050/5070N/
5140/5150D/5170DN/2070N/5240/
5250DN/5340D/5350DN/5370DW
)
I, C1, C2, S (HL-3260N)
I, C,S (HL-6050/6050D/6050DN/
8050N/5270DN/5280DW/5380DN
)
I,C1,S(HL-
5440D/5450DN/5470DW/6180D
W)
FONTNUMBER
Sets the font number
0 to n (HL-
1050/1070/1250/1270N/
1450/1470N/P2500)
0 to 0x7FFFFFFF (HL-1650/
1670N/3260N/1850/1870N/5050/
5070N/5150D/5170DN/6050/6050
D/6050DN/
8050N/2070N5240/5250DN/5270
DN/5280DW/5340D/5350DN/537
0DW/5380DN/5440D/5450DN/54
70DW/6180DW)
PITCH
Pitch of the default font in units of
characters per inch. The pitch value
can be specified to two decimal
places
0.44, 0.45, .......99.99
PTSIZE
Height of the default font in units of
points. The point size can be
specified to a quarter of a point
4.00, 4.25, .......999.75
SYMSET
Sets the symbol set.
PC8, PC8DN, PC850, PC852,
PC860, PC863, PC865, PC8TK
(All models)
OCRA, OCRB, SYMBOL,
WDINGS (HL-1050/1070/1250/
1270N/1450/1470N/P2500)
AUTOLF
Sets AUTO LF
ON or OFF
AUTOCR
Sets AUTO CR
ON or OFF
AUTOMASK
Sets AUTO MASK
ON or OFF