Media type selection, Output tray – Brother HL-2170W User Manual
Page 36
CHAPTER 2 PCL - 17
Select the height of free size paper: Esc&f#F (1/720 inch unit; for HL-3260N, 2460, 7050, 1850, 1870N,
5040, 5050, 5070N, 5140, 5150D, 5170DN, 2600CN, 3450CN, 2700CN, 2070N, 5240, 5250DN, 5270DN,
5280DW, 4040CN, 4050CDN,4070CDW, 2150N, 2170W, 5340D, 5350DN, 5370DW , 5380DN, 3070CW,
3075CW, 2250DN, 2270DW, 4140CN, 4150CDN, 4570CDW, 5440D, 5450DN, 5470DW, 6180DW,
3170CDW, L8250CDN, L8350CDW, L9200CDW and S7000DN.)
4.1.2.
Media type selection
Esc&
n# (27)(38)(110)# <1Bh><26h><6Eh>#
# stands for the media type of paper to be used.
Values for # correspond to the media type shown in the table.
Model
HL-
2070N/5240/5250D
N/5270DN/5280DW
/
2150N/2170W/
5340D/5350DN/537
0DW/5380DN
HL-
4040CN/4050C
DN/4070CDW/
3040CW/3045C
N/2250DN/227
0DW/5440D/54
50DN/5470DW
/6180DW
HL-
4140CN/415
0CDN/4570
CDW/3170C
DW/L8250C
DN/L8350C
DW/L9200C
DW
HL-
S7000DN
6WdPlain
Set as Plain Paper.
8WdRegular
5WdThin
Set as Thin Paper.
6WdThick
Set as Thick Paper.
7WdThick2
Set as Thicker Paper.
5WdBond
Set as Bond Paper.
13WdTransparency
Set as Transparent Paper.
10WdEnvelopes
Set as Envelope.
9WdEnvthick
Set as Thick Envelope.
8WdEnvthin
Set as Thin Envelope.
9WdRecycled
Set as Recycled Paper.
9WdPostcard
Set as Post Card.
6WdLabel
Set as Label.
7WdGlossy
Set as Glossy
4.1.3.
Output tray
Esc&
l#G (27)(38)(108)#(71) <1Bh><26h><6Ch>#<47h>
# denotes the output tray.
1:
Select the printer output tray.
3:
Select #1 bin.
(CT:HL-8050N)
4:
Select #2 bin.
5:
Select #3 bin.
6:
Select #4 bin.
7:
Select #5 bin.
8:
Select #6 bin.
9:
Select #7 bin.
10:
Select #8 bin.
11:
Select #9 bin.
12:
Select #10 bin.
100: Select the finisher tray (HL-3260N)
This command selects the specified output tray.
This command is ignored when the specified tray is not available.
The PJL OUTBIN command is ignored when this command is executed.
If the printer has data to print when this command is executed, the command is valid from the next page
immediately after the data is printed.