Brother HL-2170W - Manual (Page 380)

CHAPTER 10 CARBON COPY FUNCTION - 5
2.2.
How to set each function
2.2.1. Setting on the control panel
PRINT
MENU CARBON
MENU CARBON COPY
=OFF/ON/AUTO
/ PARALLEL Sets the carbon copy mode.
COPIES =1 - 8 Sets the number of copies.
COPY 1 TRAY =AUTO/REMAINING
MPTRAY
TRAY 1
TRAY 2
TRAY 3 *
Selects the paper tray.
COPY 1 MACRO =OFF
(ID number)
Sets the additional macro.
(Note) When no macro is
set, 'NO MACRO
DATA' is indicated,
and the display
returned.
COPY 2 TRAY (Same with COPY 1) (Same with COPY 1)
COPY 2 MACRO (Same with COPY 1) (Same with COPY 1)
COPY 3 TRAY (Same with COPY 1) (Same with COPY 1)
COPY 3 MACRO (Same with COPY 1) (Same with COPY 1)
COPY 4 TRAY (Same with COPY 1) (Same with COPY 1)
COPY 4 MACRO (Same with COPY 1) (Same with COPY 1)
COPY 5 TRAY (Same with COPY 1) (Same with COPY 1)
COPY 5 MACRO (Same with COPY 1) (Same with COPY 1)
COPY 6 TRAY (Same with COPY 1) (Same with COPY 1)
COPY 6 MACRO (Same with COPY 1) (Same with COPY 1)
COPY 7 TRAY (Same with COPY 1) (Same with COPY 1)
COPY 7 MACRO (Same with COPY 1) (Same with COPY 1)
COPY 8 TRAY (Same with COPY 1) (Same with COPY 1)
COPY 8 MACRO (Same with COPY 1) (Same with COPY 1)
* (Only HL-5270DN/5280DW/5380DN Printer)
When CARBON COPY=OFF is set, other carbon menu is not indicated.
The setting indication of each copy is shown on the control panel for the number of copies which is
set in the CARBON COPIES menu to set the paper tray and macro.
The setting of each copy is saved even if it is not indicated.
When implementing FACTORY RESET, all settings are initialized.