Brother HL-2170W - Manual (Page 262)

CHAPTER 5 PJL - 58
INTRAY1SIZE
(Read Only) Returns the size of the paper
currently installed in the standard
paper tray. LETTER, A4, LEGAL,
EXECUTIVE, COM10,
MONARCH, C5, DL, JISB5,
A4LONG , B5, A5, A6, B6, DLL,
POSTCARD, ORGANIZERJ,
ORGANIZERK, ORGANIZERL,
ORGANIZERM, FOLIO, P3X5,
ENVYOU4, ENVCHOU3, A3,
LEDGER, JISB4, LTRS,
EXECUTIVES, B5S, USERDEF,
ANY
INTRAY2SIZE
(Read Only) Returns the size of the paper
currently installed in the lower
paper tray. (same as INTRAY1SIZE)
INTRAY3SIZE
(Read Only) Returns the size information for the
optional lower paper cassette.
(same as INTRAY1SIZE)
SOURCETRAY Selects the paper source tray. AUTO, MPTRAY, TRAY1, TRAY2,
TRAY3
XOFFSET Sets the X offset ( horizontal
offset ) value. -500 to 500 dots
YOFFSET Sets the Y offset ( vertical offset )
value. -500 to 500 dots
DUPLEX Duplex mode ON, OFF
BINDING Returns the setting of binding edge
selection for duplex printing. LONGEDGE, SHORTEDGE
FIRSTPRINT First print mode. This makes the
first print speed faster by starting
the polygon mirror motor at Power
On. Setting to MIDDLE is effective
only for the first page after Power
ON. Setting to HIGH makes the
scanner motor rotate continuously. NORMAL, MIDDLE, HIGH
DENSITY Returns the printing density level
setting from 1 to 15. The default
value is 8. 1 (lighter) to 15 (darker)
LANG Returns the language for control
panel and status readback
information. ENGLISH, FRENCH, GERMAN,
DUTCH, SPANISH, ITALIAN,
NORWEGIAN, FINNISH,
PORTUGUESE, DANISH,
SWEDISH, CZECH, POLISH,
HUNGARIAN, RUSSIA,
BULGARIAN, ROMANIAN,
SLOVAKIAN, JAPANESE
CPLOCK Returns the lock status of the
control panel. If OFF, the control
panel is unlocked. If ON, the
control panel is locked. OFF, ON
PASSWORD Password for panel lock to write to
the NVRAM with the
DEFAULT/INITIALIZE command. 0 to65535
ECONOMODE Toner Saving Mode OFF, ON
ECONOLEVEL Level for Toner saving mode. If set
to 1, approx. 50 % toner is saved. If
set to 2, approx. 25% toner is saved. 1, 2
MPTRAY MP Tray Priority For AUTO feeder
selection mode. CASSETTE, FIRST
TIMEOUT Sets the timeout value for
Automatic interface switching
(seconds) 1 to 99
AUTOFF Sets the auto FF setting to ON or
OFF. ON or OFF