Commands descriptions, Pjl output tray, Pcl output tray – Brother HL-2170W User Manual
Page 520: Ps output tray, Ps output tray command
APPENDIX E REFERENCE LIST OF FS-5050 SERIES UNIQUE COMMANDS - 4
3.1.
Commands Descriptions
3.1.1.
PJL output tray
Format
@PJL SET/DEFAULT OUTBIN=TrayName
Parameter
TrayName*
FINISHER:
Select the tray of the Finisher/Stapler unit
Default = ALLSTACKER
Explanation
This command selects the Finisher/Stapler unit.
This command is ignored when the Finisher/Stapler unit is not available.
The difference between the SET and DEFAULT selection and the effective period of this setting follow the
PJL specifications.
3.1.2.
PCL output tray
Command
Esc&l#G (27)(38)(108)#(71) <1Bh><38h><6ch>#<47h>
Parameter
# denotes the output tray.
100
:
Select the Finisher/Stapler unit.
Default = 1
Explanation
This command selects the Finisher/Stapler unit.
This command is ignored when the Finisher/Stapler unit is not available.
The PJL OUTBIN command is ignored when this command is executed.
3.1.3.
PS output tray
Command
<</BROutbinMode #>>setpagedevice
Parameter
#
3:
Select the Finisher/Stapler unit.
Default = 0
Explanation
This command selects the Finisher/Stapler unit.
This command is ignored when the Finisher/Stapler unit is not available.
<Example>
<</BROutbinMode 3>>setpagedevice