Brother HL-2170W - Manual (Page 263)

CHAPTER 5 PJL - 59
TIMEOUTFF Sets the timeout value for auto FF.
(seconds) 1 to 99
AUTOSLEEP Power Save Mode ON, OFF
TIMEOUTSLEEP Timeout for Power Save mode. The
printer goes into the power save
mode after this time-out period
(minutes). 1 to 99
MEDIATYPE Media Type. The temperature of
fixing unit is adjusted depending on
this setting. REGULAR, THICK, THICK2,
TRANSPARENCY, THIN, BOND,
ENVELOPES, ENVTHICK,
ENVTHIN, RECYCLED,
POSTCARD, LABEL
REPRINT Sets the reprint function. OFF, ON, JOB
COLLATE Sets the collate printing. ON, OFF
HOLD Specifies whether the received data
is stored in the hard disk or printed. OFF, STORE, PROOF
HOLDTYPE Specifies the document type of the
received data which has been stored
in the optional hard disk. If
PRIVATE is selected, a password is
required for the data to be printed or
deleted. PUBLIC, PRIVATE
HOLDKEY Specifies the password when the
document type is set to PRIVATE. 0 to 9 (4 digits to be selected)
TIMESETYEAR Clock: year setting 1998 to 2039
TIMESETMONTH* Clock: month setting 1 to 12
TIMESETDAY Clock: date setting 1 to 31
TIMESETHOUR Clock: hour setting 0 to 23
TIMESETMIN Clock: minute setting 0 to 59
TIMESETSEC Clock: second setting 0 to 59
TIMESTYLE Sets the display style of the clock. YMD (YYYY/MM/DD hh/mm),
MDY (MM/DD/YYYY hh/mm),
DMY (DD/MM/YYYY hh/mm)
SUMMERTIME Clock: summer time setting OFF, ON
ZONESET Clock: time zone setting OFF, ON
TIMEZONE Clock: time setting of time zone -24 to +24
RENDERMODE Color printing or monochrome
printing is specified .
Selecting grayscale mode prints the
document in 256 levels of
grayscale. COLOR, GRAYSCALE,
AUTOCOLOR
APTMODE Print quality in color printing is
specified OFF, ON, ON4, B8, B8H
COLORADAPT The printer checks the content of
the documents for color. If color is
detected, it will print in color. If no
color content is detected, it will
print in monochrome.
OFF, ON
STRINGCODESET Character code set of the
information (ex. JOB NAME) is
specified. HPROMAN8, ISO88592, ISO88595,
JISX02011976