Variables for, 4070cdw/3040cn/ 3045cn/3070cw/3075cw – Brother HL-2170W User Manual
Page 261
CHAPTER 5 PJL - 57
6.2.2.
Variables for HL-
1660e/2060/2400C/2400Ce/3400CN/2600CN/3450CN/2700CN/4040CN/4050CDN/4070C
DW/3040CN/3045CN/3070CW/3075CW
1.
General PJL Environment Variables
The PJL environment variables which are not printer language-specific are listed in the following table.
When using these valuables, do not use the LPARM command.
Variables
Description
Sample Value Range
COPIES
Number of uncollated copies for
each page of the job.
1 to 999
PAPER
Paper size.
LETTER, A4, LEGAL,
EXECUTIVE, COM10,
MONARCH, C5, DL, JISB5,
A4LONG , B5, A5, A6, B6, DLL,
POSTCARD, ORGANIZERJ,
ORGANIZERK, ORGANIZERL,
ORGANIZERM, FOLIO, P3X5,
ENVYOU4, ENVCHOU3, A3,
LEDGER, JISB4, LTRS,
EXECUTIVES, B5S, USERDEF
ORIENTATION Page
orientation. PORTRAIT,
LANDSCAPE
MANUALFEED
Manual feed mode.
ON, OFF
RET
Configuration of the High
Resolution Control hardware.
LIGHT, MEDIUM, DARK, OFF
PAGEPROTECT
Configuration of the Page
protection mode. This mode
reserves a block of printer memory
to avoid 31 PRINT OVERRUN
errors.
AUTO, OFF, LETTER, LEGAL, A4
RESOLUTION
Printer resolution setting. If the
printer cannot print a large file at
600 dpi because of insufficient
memory, the printer decreases the
resolution to 300 dpi automatically
300, 600
PERSONALITY
Personality (emulation) can be
switched with the @ PJL ENTER
command or ESC CR ## command.
If the AUTO option is selected
(factory default), the printer senses
the data from the computer and
switches the emulation
automatically.
AUTO, PCL , POSTSCRIPT, IBM,
EPSON, HPGL
TIMEOUTEMU
The time out is the duration during
which another automatic emulation
change is not allowed. Duration of
the timeout is set in seconds.
1 to 99
AUTOCONT
Returns the configuration of the
Continue mode.
ON, OFF
LOWTONER
Returns the configuration for
TONER EMPTY message action. If
STOP, the printer stops printing. If
CONTINUE, the printer continues
printing.
CONTINUE, STOP
INTRAY 1
(Read Only)
Returns the auto-selection lock
status for the MP tray.
LOCKED, UNLOCKED
INTRAY 2
(Read Only)
Returns the auto-selection lock
status for the upper paper tray.
LOCKED, UNLOCKED
INTRAY 3
(Read Only)
Returns the auto-selection lock
status for the optional lower paper
cassette.
LOCKED, UNLOCKED