Pjl job offset on/off, Ps job offset on/off, Pcl job separate (esc&l1t) – Brother HL-2170W User Manual
Page 522: Pcl job separate (esc&l1t) command
APPENDIX E REFERENCE LIST OF FS-5050 SERIES UNIQUE COMMANDS - 6
3.1.6.
PJL job offset on/off
Format
@PJL SET/DEFAULT JOBOFFSET=ON/OFF
Parameter
ON:
Paper is ejected offset by each job.
OFF:
Paper is ejected together.
Default = ON
Explanation
This command selects the job offset.
This command is ignored when the Finisher/Stapler unit is not available.
The difference between the SET and DEFAULT selection and the effective period of this setting follow the
PJL specifications.
3.1.7.
PS job offset on/off
Command
Parameter
bool
True:
Paper is ejected offset by each job.
False:
Paper is ejected together.
Default = false
Explanation
This command selects the job off set.
This command is ignored when the Finisher/Stapler unit is not available.
<Example>
<<BRjoboffset true>>setpagedevice
3.1.8.
PCL job separate (Esc&l1T)
Command
Esc&l1T (27)(38)(108)(49)(84) <1Bh><26h><6ch><31h><54h>
Explanation
This command separates the job.
This command is ignored when the Finisher/Stapler unit is not available.