Brother HL-3170CDW - Manual (Page 100)

General Information
94
3
WLAN TCP/IP Boot Method Auto
* / Static / RARP /
BOOTP
/ DHCP
Chooses the IP method that
best suits your needs.
IP Address ###.###.###.###
(000.000.000.000)
*
1
Enter the IP address.
Subnet Mask ###.###.###.###
(000.000.000.000)
*
1
Enter the Subnet mask.
Gateway ###.###.###.###
(000.000.000.000)
*
1
Enter the Gateway address.
IP Boot Tries 0
/ 1 / 2 / 3* / ... / 32767 Specifies the number of
attempts the machine will try to
obtain an IP address when the
Boot Method
is set to any
setting except Static.
APIPA On
* / Off Automatically allocates the IP
address from the link-local
address range.
1
IPv6 On
/ Off* Enables or Disables the IPv6
protocol.
Setup Wizard
- - Configures the wireless
network settings using the
setup wizard.
WPS/AOSS
- - Configures the wireless
network settings using WPS or
AOSS™ method.
WPS w/PIN Code
- - Configures the wireless
network settings using WPS
with a PIN code.
Network Menu for HL-3140CW and HL-3170CDW (continued)
Submenu 1 Submenu 2 Menu Selections Options Descriptions
The factory settings are shown in Bold with an asterisk.