Brother HL-3170CDW - Manual (Page 101)

General Information
95
3
WLAN
(Continued)
WLAN Status
(Appears only
when
WLAN Enable
is On
and
Wired Enable
2
is Off.)
Status Active(11n)
/
Active(11b)
/
Active(11g)
/
Wired LAN Active
2
/
WLAN OFF
/ AOSS Active /
Connection Fail
Shows wireless Ethernet link
status.
Signal Strong
/ Medium / Weak /
None
Shows the signal condition.
Channel
- Shows the channel in use
when Status is Active.
Speed
- Shows the connecting speed
when Status is Active.
SSID
- Shows SSID [uses a
maximum of 32 digits and
characters 0-9, a-z and A-Z in
ASCII values]
Comm. Mode Ad-hoc
/ Infrastructure Shows the current
Communication Mode.
MAC Address
- - Shows MAC address of the
machine.
Set to Default
(HL-3170CDW)
Restores wireless network settings of the internal print server to the factory default.
WLAN Enable
-
On
/ Off* Turns the wireless interface on
or off.
Wi-Fi Direct Push Button
- - You can easily configure your
Wi-Fi Direct™ network
settings easily using the one-
button push method.
PIN Code
- - You can easily configure your
Wi-Fi Direct™ network
settings easily using WPS with
a PIN code.
Manual
- - You can manually configure
your Wi-Fi Direct™ network
settings manually.
Group Owner
-
On
/ Off* Sets your machine as the
Group Owner.
Device Info. Device Name
- You can see the device name
of your machine.
Network Menu for HL-3140CW and HL-3170CDW (continued)
Submenu 1 Submenu 2 Menu Selections Options Descriptions
The factory settings are shown in Bold with an asterisk.