Brother HL-3170CDW - Manual (Page 96)

General Information
90
3
HP LaserJet
(HL-3170CDW)
Font No. I000
/ ... / I059* / ... / I071 Sets the font number.
Font Pitch 0.44
/ ... / 10.00* / ... /
99.99
Sets the font pitch.
The Font Pitch menu will appear
when you choose I059 to I071 in
Font No.
setting.
Font Point 4.00
/ ... / 12.00* / ... /
999.75
Sets the font size.
The Font Point menu will appear
when you choose I000 to I058 in
Font No.
setting.
Symbol Set PC-8
* / PC-8 D/N / ... Sets the symbol set or the character
set.
Table Print
- Prints the code table.
If Change Emulation appears on
the LCD, choose Auto or
HP LaserJet
in Emulation of the
Print Menu
(see page 89).
Auto LF On
/ Off* ON: CR i CR+LF, OFF: CR i CR
Auto CR On
/ Off* ON: LF i LF+CR, FF i FF+CR, or
VT i VT+CR
OFF: LF i LF, FF i FF, or VT i VT
Auto WRAP On
/ Off* Chooses whether a line feed and
carriage return will happen when the
machine reaches the right margin.
Auto SKIP On
* / Off Chooses whether a line feed and
carriage return will happen when the
carriage position reaches the bottom
margin.
Left Margin ##
Sets the left margin at column 0 to 70
columns at 1 cpi. The default setting
is 0 cpi.
Right Margin ##
Sets the right margin at column 10 to
80 columns at 1 cpi. The default
setting is 80 cpi (Letter).
Top Margin #.##
Sets the top margin at a distance
from the top edge of the paper: 0.00,
0.33, 0.50, 1.00, 1.50 or 2.00 inches.
The default setting is 0.50 inches.
Bottom Margin #.##
Sets the bottom margin at a distance
from the bottom edge of the paper:
0.00, 0.33, 0.50, 1.00, 1.50 or
2.00 inches. The default setting is
0.50 inches.
Print Menu (continued)
Submenu Menu Selections Options Descriptions
The factory settings are shown in Bold with an asterisk.