Brother HL-3170CDW - Manual (Page 99)

General Information
93
3
Network Menu for HL-3140CW and HL-3170CDW
Submenu 1 Submenu 2 Menu Selections Options Descriptions
Wired LAN
(HL-3170CDW)
TCP/IP Boot Method Auto
* / Static / RARP /
BOOTP
/ DHCP
Chooses the IP method that
best suits your needs.
IP Address ###.###.###.###
(000.000.000.000)
* 1
Enter the IP address.
Subnet Mask ###.###.###.###
(000.000.000.000)
*
1
Enter the Subnet mask.
Gateway ###.###.###.###
(000.000.000.000)
*
1
Enter the Gateway address.
IP Boot Tries 0
/ 1 / 2 / 3* / ... / 32767 Specifies the number of
attempts the machine will try to
obtain an IP address when the
Boot Method
is set to any
setting except Static.
APIPA On
* / Off Automatically allocates the IP
address from the link-local
address range.
1
IPv6 On
/ Off* Enables or disables the IPv6
protocol.
Ethernet
-
Auto
* / 100B-FD /
100B-HD
/ 10B-FD /
10B-HD
Chooses Ethernet link mode.
Wired Status
-
Active 100B-FD
/
Active 100B-HD
/
Active 10B-FD
/
Active 10B-HD
/
Inactive
/ Wired OFF
Shows Ethernet link status.
MAC Address
- - Shows MAC address of the
machine.
Set to Default
Restores wired network settings of the internal print server to the factory default.
Wired Enable
-
On
* / Off Chooses Ethernet link mode.
The factory settings are shown in Bold with an asterisk.