Brother HL-3170CDW - Manual (Page 88)

General Information
82
3
3 Menu Keys:
a or b ( + or -)
Press to scroll through the menus and options.
Press to enter numbers and increase the number. You can enter numbers in two ways. Press a or b to
move up or down one number at a time, or hold down a or b to move faster. When you see the number
you want, press OK.
OK
Lets you store your settings in the machine. After changing a setting, the machine returns to the previous
menu level.
Back
Go back one level in the menu structure.
Lets you choose the previous digit while setting numbers.
4 Secure
You can print data saved in the memory when you enter your four-digit password. (For more information,
see Printing Secure data on page 99.)
5 Go
You can clear some error messages by pressing Go. To clear all other errors follow the control panel
instructions or see Error and maintenance messages on page 158.
Pause and continue printing.
Lets you print any data remaining in the machine's memory.
Lets you choose the displayed option in the last menu level. After a setting is changed, the machine returns
to Ready mode.
Switch to Reprint mode by pressing this key and holding it down for about 4 seconds. (For details, see
Reprinting documents on page 98.)
6 Cancel
Lets you cancel the current setting.
Cancels a programmed print job and clears it from the machine’s memory. To cancel multiple print jobs,
hold down this key until the LCD shows Cancel All Jobs.
7 Error LED
Blinks in orange when the LCD displays an error or an important status message. (For details, see LED
indications on page 83.)
8 Data LED
The LED will blink depending on the machine status. (For details, see LED indications on page 83.)