Brother HL-3170CDW - Manual (Page 102)

General Information
96
3
1 ### means a number within the range of 000 to 255. On connection to the network, if the machine's 'Boot Method' is 'Auto' the machine will attempt
to set the IP address and Subnet Mask from a boot server such as DHCP or BOOTP. If a boot server cannot be found, an APIPA IP address will
be allocated, such as 169. 254. [001-254]. [000-255]. If the 'Boot Method' of the machine is set to 'Static' you will need to manually enter an IP
address from the machine's control panel.
2 HL-3170CDW only
Reset Menu
3
Wi-Fi Direct
(Continued)
Device Info.
(Continued)
SSID
- Shows SSID of Group Owner.
When the machine is not
connected, the LCD shows
Not Connected
.
IP Address
- Shows the IP Address of your
machine.
Status Info. Status G/O Active(**)
/
Client Active
/
Not Connected
/ Off /
Wired LAN Active
**
= the number of devices
Shows the Wi-Fi Direct™
network status.
Signal Strong
/ Medium / Weak /
None
Shows the Wi-Fi Direct™
network signal strength.
When your machine acts as
the Group Owner, the LCD
always shows Strong.
Channel
- Shows the channel in use
when the Status is
G/O Active(**)
or
Client Active
.
Speed
- Shows the connecting speed
when the Status is
G/O Active(**)
or
Client Active
.
I/F Enable
-
On
/ Off* Enables or disables the Wi-Fi
Direct™ connection.
Network Reset
Restores all network settings of the internal print server to the factory default.
Display Shows Description
Network
Restores all network settings of the internal print server to the factory default.
Factory Reset
Resets the machine and restores the printer settings (including command settings) to the
factory default settings.
The factory settings are shown in Bold with an asterisk.
Network Menu for HL-3140CW and HL-3170CDW (continued)
Submenu 1 Submenu 2 Menu Selections Options Descriptions
The factory settings are shown in Bold with an asterisk.