Brother HL-3170CDW - Manual (Page 49)

Driver and Software
43
2
Sleep Time
2
When the machine does not receive data for a certain period of time, it enters Sleep mode. In Sleep mode,
the machine acts as though it were turned off. When you choose Printer Default, the timeout setting will be
reset to the specific time set at the factory; this can be altered in the driver. Intelligent Sleep mode adjusts to
the most appropriate timeout setting depending on the frequency of your machine use.
While the machine is in Sleep mode, the LCD shows Sleep, but the machine can still receive data. Receiving
a print job will wake up the machine to start printing.
Improve Print Output
2
This feature allows you to improve a print quality problem.
 Reduce Paper Curl
If you choose this setting, the paper curl may be reduced.
If you are printing only a few pages, you do not need to choose this setting. We recommend that you
change the printer driver setting in Media Type to a thin setting.
NOTE
This operation will decrease the temperature of the machine's fusing process.
 Improve Toner Fixing
If you choose this setting, the toner fixing capabilities may be improved. If this selection does not provide
enough improvement, change the printer driver setting in Media Type to a thick setting.
NOTE
This operation will increase the temperature of the machine's fusing process.