Brother PC-8500 8500D - Manual (Page 137)

134
Utility
Stitches
Characters
and
Decorative
Stitches
Embroidering
Editing
Embroidery
Patterns
Retrieving
My
Custom Stitch
TM
Maintenance
Error
Messages
Trouble shooting
Sewing
Chart
Patterns
(Programmed
in Machine)
Patterns (Memory
Card)
Sewing
Setting Up
1
2
3
Use stabilizer fabric to provide extra support
while embroidering. After embroidering is
completed, remove the stabilizer fabric carefully.
Use stabilizer fabric which is designed specially
for embroidering.
Case A
1 Fabric
2 Attach the stabilizer fabric by ironing. (If you
do not wish to iron, attach the stabilizer fabric
with a basting stitch.)
3 Stabilizer
2
1
Case B
1 Fabric
2 Stabilizer
1
2
Case C
1 Ribbon (Secure with double-sided tape)
2 Stabilizer
NOTE
Temporary spray on adhesive will also enable
you to tack down unusually shaped objects.
Some glue may get onto the presser foot, needle
and needle plate at this time. Finish embroidering
the applique pattern and then clean away the
glue.
Embroidering onto small pieces of fabric or onto corners