Brother PC-8500 8500D User Manual
Page 141
138
(Programmed
5. Select character, then press the “
” key.
After a while the characters will be displayed. The characters
will be laid out in the center of the embroidery area.
1
Press these keys to move patterns in the direction of the
arrows. (See page 139 for details.)
2
Press this key to bring the pattern back to the center of the
embroidery area.
3
Press this key to delete the pattern being edited. (See page
141 for details.)
4
Use this key to change the pattern to be edited.
5
Use this key to change character spacing. (See page 139
for details.)
6
Use this key to change character size. (See page 140 for
details.)
7
Use this key to rotate characters to the right or left in 5-
degree steps. (See page 140 for details.)
8
Press this key when you want to change character
configuration. (See page 141 for details.)
9
Press this key when you want to change the extent of a
curve. (See page 141 for details.)
0
Press this key to move to the next stage.
5
6
7 8 9
3
0
4
2
1