Brother PC-8500 8500D - Manual (Page 21)

Utility
Stitches
Characters
and
Decorative
Stitches
Embroidering
Editing
Embroidery
Patterns
Retrieving
My
Custom Stitch
TM
Maintenance
Error
Messages
Trouble shooting
Sewing
Chart
Patterns
(Programmed
in Machine)
Patterns (Memory
Card)
Sewing
Setting Up
18
Setting the bobbin
1
2
1
1. Slide open the bobbin cover.
1 Bobbin cover
2 Bobbin cover release button
2. Insert the bobbin into the shuttle with the thread direction as
noted in the diagram.
3. Guide the thread end through the slit, then pull the thread
toward you to cut off any excess thread.
1 Built-in thread cutter
1
2
4. Close the bobbin cover by placing the left end in place and
pressing down lightly on the right end so that it snaps into
place.
* Sewing can begin without pulling out the bobbin thread.