Side application – Brother PC-8500 8500D User Manual
Page 71
68
(Programmed
1. Attach presser foot “J” and sew straight stitches up to the
crotch end. Change to a basting stitch and sew to the top of
the fabric.
1
Crotch end
2
Reverse stitch
3
Basting stitch
4
Reverse side
4
2. Press the seam allowance open and align the folded hem
along the teeth of the zipper, while keeping 3 mm (1/8”) for
the sewing space.
1
Reverse side
2
Keep 3 mm (1/8”) for sewing
3
Teeth of zipper
4
Slider on head of zipper
5
Crotch end (Base of zipper)
3. Select the “
” stitch and then touch the “
” key.
The necessary adjustment for zipper insertion will be carried
out automatically.
I
4. Put the left side of presser foot “I” into the holder, and then
sew the bottom layer to the crotch end (base of zipper).
*
When the automatic thread cutting and automatic
reinforcement stitch are preset, reinforcement stitches will
be sewn automatically at the start of sewing. Press the
“REVERSE STITCH” button to sew a reinforcement stitch
and trim the thread automatically at the finish of sewing.
Side application