Brother PC-8500 8500D - Manual (Page 179)

176
Utility
Stitches
Characters
and
Decorative
Stitches
Embroidering
Editing
Embroidery
Patterns
Retrieving
My
Custom Stitch
TM
Maintenance
Error
Messages
Trouble shooting
Sewing
Chart
Patterns
(Programmed
in Machine)
Patterns (Memory
Card)
Sewing
Setting Up
This message is displayed when the embroidery unit is attached
while the needle is lowered.
This message is displayed if the “START/STOP” button is
pressed while the foot controller is still connected.
This message is displayed if the “START/STOP” button is
touched when in editing mode.
This message is displayed if a non-buttonhole pattern is
selected and the “START/STOP” button or “REVERSE
STITCH” button is pressed while the buttonhole lever is
lowered.
This message is displayed if a buttonhole pattern is selected
and the “START/STOP” button or “REVERSE STITCH” button
is pressed while the buttonhole lever is raised.
This message is displayed when the embroidery pattern is
larger than the embroidery frame.