Changing the stitch width – Brother PC-8500 8500D User Manual
Page 60
57
(Programmed
4
1
2
6
5
3
Measure the button diameter + thickness to set
the plate.
Example: For a button with a diameter of 1.5
cm (9/16”) and a thickness of 1 cm
(3/8”), the scale should be set at 2.5
cm (1”)
1
Thickness [1 cm (3/8”)]
2
Diameter [1.5 cm (9/16”)]
3
Button holder plate
4
Scale
5
Diameter + thickness [2.5 cm (1”)]
[0.5 cm (3/16”) in one scale.]
6
0.5 cm (3/16”)
Buttons that do not fit into the guide plate (Odd-shaped buttons)
Changing the stitch length
3
2
1
Touch the “
” and “
” stitch length setting keys to adjust
the stitch length.
1
“
”: Longer
2
Normal length 0.4 mm (1/64”)
3
“
”: Shorter
*
If the fabric will not feed (for instance, because it is too
thick), touch the “
” stitch length setting key to increase
the stitch length.
Changing the stitch width
2
1
Touch the “
” and “
” stitch width setting keys to adjust
the stitch width.
1
“AUTO” width 5.0 mm (3/16”)
2
“
” : Narrower