Brother PC-8500 8500D User Manual
Page 155
152
(Programmed
Deleting a stored pattern
1. If you touch the “
” key, a screen similar to the one
shown at the left will be displayed.
1
This indicates a pocket which has a pattern saved in it.
2
This indicates the amount of data in the pattern.
3
This displays the pattern which is saved in that pocket.
4
Touch this key to delete a saved pattern.
5
Touch this key to cancel the deleting of a pattern.
6
This indicates how much data space is needed.
2. Touch the pocket to select the pattern to be deleted, and
then touch the “
” key.
3. Touch the “
” key.
If the amount of space needed becomes available then the
new pattern will be saved automatically. If there still is not
enough space to save the pattern, repeat the above
procedure to delete another pattern.
*
To cancel the deleting of a pattern, touch the “
” key.
*
Do not turn off the power while the word “Saving” is
displayed on the screen.
If you turn off the power during this time, the data being
saved may be deleted.
3
4
5
6
2
1