Brother PC-8500 8500D - Manual (Page 59)

56
Utility
Stitches
Characters
and
Decorative
Stitches
Embroidering
Editing
Embroidery
Patterns
Retrieving
My
Custom Stitch
TM
Maintenance
Error
Messages
Trouble shooting
Sewing
Chart
Patterns
(Programmed
in Machine)
Patterns (Memory
Card)
Sewing
Setting Up
Order of one cycle
1
1
1
1 Reinforcement stitch
Sewing stretch fabrics
5 When sewing buttonholes onto stretch fabric, insert onto stretch
fabric, a gimp thread into the buttonhole seam (“
”
buttonholes only).
1. Hook the gimp thread onto the end of presser foot “A”, insert
it into the groove at the front of the presser foot and
temporarily tie it there.
1 Upper thread
2 Bobbin thread
5
2. Lower the presser foot and start sewing.
* Set the stitch width to match the diameter of the gimp
thread.
3. Once sewing is completed, pull the gimp thread gently to
remove any slack, and trim any surplus length.