Canon imagePROGRAF iPF760 - Manual (Page 117)

Cause Corrective Action
The loaded paper is a size not com-
patible with borderless printing. For information on types of paper compatible with borderless printing, refer to the Paper Refer-
ence Guide.
(See Paper Reference Guide.)
Press ▲ or ▼ to select Print With Border, and then press the OK button to continue printing. The
document will be printed with a border.
Paper position not suitable for borderless printing. Paper position not suitable for borderless printing.
Cause Corrective Action
Because paper expands or contracts de-
pending on the environment of use, it may
become narrower or wider than the sup-
ported width for borderless printing. Press ▲ or ▼ to select Stop Printing, and then press the OK button.
Use each type of paper only where the recommended environmental conditions are met. For
details on environmental conditions for various paper, see the Paper Reference Guide.
(See Paper Reference Guide.)
Select None when you have set Detect Mismatch in the Control Panel menu to Warning.
However, note that this error may affect the printing quality.
The paper is loaded askew. Press ▲ or ▼ to select Fix Paper Position and straighten the paper so that the edges are
between the ink grooves for borderless printing.
Insert the roll firmly until it touches the flange of the Roll Holder.
(See "Attaching the Roll Holder to Rolls.")
→P.9
Select None when you have set Detect Mismatch in the Control Panel menu to Warning.
However, note that this error may affect the printing quality.
Press ▲ or ▼ to select Print With Border, and then press the OK button to continue print-
ing. The document will be printed with a border.
Roll paper is not securely in contact with roll holder. Roll paper is not securely in contact with roll holder.
Cause Corrective Action
When the roll was loaded, the roll was not inserted firmly all the way
on the Roll Holder. Follow these steps to reload the roll.
1.
Press the OK button and remove the roll holder from the printer.
2.
Insert the roll firmly on the Roll Holder until it touches the flange.
(See "Attaching the Roll Holder to Rolls.")
→P.9
3.
Load the Roll Holder in the printer.
iPF760 Paper position not suitable for borderless printing.
Basic Guide
Error Message
Messages regarding paper
117