Messages regarding hp-gl/2, This type of paper is not compatible with hp-gl/2, Gl2: w0502 the parameter is out of range – Canon imagePROGRAF iPF760 User Manual
Page 124: Gl2: w0504 this command is not supported
Messages regarding HP-GL/2
Messages regarding HP-GL/2
This type of paper is not compatible with HP-GL/2.
This type of paper is not compatible with HP-GL/2.
Cause
Corrective Action
The printer has received a HP-GL/2 print
job that cannot be printed on the paper
that has been advanced.
Follow these steps to replace the type of paper in the printer.
1.
Press ▲ or ▼ to select Stop Printing, and then press the OK button.
2.
Replace the paper with a type compatible with HP-GL/2. For details on paper compatible
with HP-GL/2, refer to the Paper Reference Guide. (See "Types of Paper.")
→User's Guide
Press ▲ or ▼ to select Print, and then press the OK button to resume printing. However,
note that this error may cause paper jams and affect the printing quality.
GL2: Wxxxx The memory is full. (xxxx is 0501, 0903, or 0904)
GL2: Wxxxx The memory is full. (xxxx is 0501, 0903, or 0904)
Cause
Corrective Action
The printer memory is full.
Because the entire print job could not be received, the printer may not be able to print the entire original.
Check the printing results.
GL2: W0502 The parameter is out of range.
GL2: W0502 The parameter is out of range.
Cause
Corrective Action
A parameter specified in a HP-GL/2 command is out of the supported
range.
Check the print job.
If you have specified ProcessingOption > Warning > On in
the Control Panel menu, set it to Off instead.
GL2: W0504 This command is not supported.
GL2: W0504 This command is not supported.
Cause
Corrective Action
The printer has received an unsupported HP-GL/2 command.
Check the print job.
If you have specified ProcessingOption > Warning > On in the Control
Panel menu, set it to Off instead.
This type of paper is not compatible with HP-GL/2.
iPF760
Error Message
Messages regarding HP-GL/2
124