Canon imagePROGRAF iPF760 - Manual (Page 15)

ManageRemain-
Roll
Barcodes Printer Operation After the Paper is Fed
On Printed There is no need to specify the type and length of the paper.
Not printed A menu for selection of the paper type and length is automatically shown on the Display Screen.
Press ▲ or ▼ to select the type and length of paper loaded, and then press the OK button.
Note
• For details on types of paper to select, see the Paper Reference Guide. (See "Types of Paper.")
→User's Guide
8
Holding it at the positions indicated, close the Roll
Cover.
Note
• Cut the edge of the roll after the paper is advanced if it is soiled or if there are cuts from scissors or the blade
after removing creased edges. (See "Specifying the Cutting Method for Rolls.")
→User's Guide
Removing the Roll from the Printer Removing the Roll from the Printer
Remove rolls from the printer as follows.
Note
• If you need to cut the roll, see "Specifying the Cutting Method for Rolls." →User's Guide
1
On the Tab Selection screen of the Control Panel, press ◀ or
▶ to select the Paper tab ( ).
Note
• If the Tab Selection screen is not displayed, press the Menu button.
2
Press the OK button.
The Paper Menu is displayed.
3
Press ▲ or ▼ to select Eject Paper, and then press the OK button.
iPF760 Removing the Roll from the Printer
Basic Guide
Handling Paper
Handling rolls
15