The printer stops during a print job, An error message is shown on the display screen, The printer ejects blank, unprinted paper – Canon imagePROGRAF iPF760 User Manual
Page 92
The printer stops during a print job
The printer stops during a print job
An error message is shown on the Display Screen
An error message is shown on the Display Screen
Status
Corrective Action
An error message is displayed during printing.
Check the error message and take action as necessary.
(See "Error Messages.")
The last portion of roll paper was used during a print job, and paper
could not be advanced because the trailing edge is taped to the roll.
Remove the used roll and insert a new roll.
(See "Removing the Roll from the Printer.")
(See "Removing Rolls From the Roll Holder.")
→User's Guide
(See "Loading and Printing on Rolls.")
→User's Guide
The printer ejects blank, unprinted paper
The printer ejects blank, unprinted paper
Status
Corrective Action
The leading edge of the roll paper was cut to
straighten it.
The leading edge of rolls may be cut to straighten it if you have selected Trim Edge
First > On or Automatic in the Control Panel menu.
(See "Cutting the Leading Edge of Roll Paper Automatically.")
→User's Guide
The Printhead nozzles are clogged.
Print a test pattern to check the nozzles and make sure the Printhead is in good condi-
tion for printing.
(See "Checking for Nozzle Clogging.")
→User's Guide
A print job was received from an incompatible
printer driver.
Use the correct imagePROGRAF printer driver for the printer and try printing again.
The printer has received print data that in-
cludes HP RTL commands when Auto Rotate
is On in the Control Panel menu.
In the Control Panel, set Auto Rotate to Off and print again.
(See "Menu Settings.")
→User's Guide
The printer is damaged.
Contact your Canon dealer for assistance.
An error message is shown on the Display Screen
iPF760
Troubleshooting
The printer stops during a print job
92