Canon imagePROGRAF iPF815 - Manual (Page 132)

Printing Vertical or Horizontal Banners (Large-Format Printing; Windows)
This topic describes how to print a banner about five times as long as the roll width based on the following example.
• Document: A horizontal banner created in Microsoft Word
• Page size: Non-standard (100×500 mm [3.9×19.7 in])
• Paper: Roll
• Paper type: Plain Paper
• Roll paper width: 16 in (406.4 mm)
Follow the steps below to print a banner in either horizontal or vertical format.
1.
Register a Custom Paper Size.
Banners tend to be in non-standard sizes, so register a Custom Paper Size. In this example, 100×500 mm (3.9×19.7 in)
is registered.
2.
In the application, create an original in the size you registered.
3.
Print the banner, using the settings that correspond to banners.
Registering a Custom Paper Size
This example describes how to register a paper size that is horizontally elongated and suitable for banners in either horizon-
tal or vertical format.
1.
Display the printer driver dialog box.(See "Accessing the Printer Driver Dialog Box from the Operating System
Menu (Windows)
→P.213 ")
2.
Click the Page Setup tab to display the Page Setup sheet.
3.
Select and click a roll paper in the L Paper Source list.
Enhanced Printing Options > Printing banners or at other non-standard sizes >
Printing Vertical or Horizontal Banners (Large-Format Printing; Windows) iPF815
3
116