Canon imagePROGRAF iPF815 - Manual (Page 910)

Cause Corrective Action
You tried to print a test pattern for
printer adjustment on several sheets,
but sheets of different types of paper
were used. Follow these steps to ensure the paper type matches on the printer and in the
printer driver.
1. Hold down the Stop button for a second or more to cancel printing.
2. Either change the type of paper specified in the printer driver settings or
replace the loaded paper and change the paper type setting on the printer.
(See "Loading and Printing on Rolls.")
→P.3
(See "Loading and Printing on Sheets.") →P.8
Press the Online button to resume printing.
However, note that this error may cause paper jams and affect the printing
quality.
When the Detect Mismatch menu is
set to Warning, the type of paper loa-
ded does not match the type specified
in the printer driver. You can continue to print, but note that this error may cause problems in the
printing results.
The paper is too small.
Cause Corrective Action
When the Detect Mismatch menu is set to
Pause, the paper loaded in the printer is small-
er than the size specified in the printer driver. Press the Online button to resume printing.
However, note that this error may cause paper jams and affect the
printing quality.
Adjust the paper size setting in the printer driver to match the size
loaded in the printer as follows.
1. Hold down the Stop button for a second or more to cancel print-
ing.
2. Change the paper size setting in the printer driver to the size loa-
ded in the printer and try printing again.
Replace the loaded paper with paper of a size that matches the size
setting in the printer driver as follows.
1. Hold down the Stop button for a second or more to cancel print-
ing.
2. Replace the loaded paper to match the paper size setting in the
printer driver and try printing again.
When the Detect Mismatch menu is set to
Warning, the paper loaded in the printer is
smaller than the size specified in the printer
driver. You can continue to print, but note that this error may cause prob-
lems in the printing results.
RollWdthMismatch
Cause Corrective Action
The roll width set in Fit Roll Paper Width in the
printer driver does not match the width of the roll loa-
ded in the printer. Press the Online button to resume printing.
However, note that this error may cause paper jams and af-
fect the printing quality.
Error Message > Messages regarding paper >
The paper is too small. iPF815
13
894