Canon imagePROGRAF iPF815 - Manual (Page 909)

Messages regarding paper
Papr Type Mismatch ....................................................................................................................................... 893
PaprTypeMismatch ......................................................................................................................................... 893
The paper is too small. .................................................................................................................................... 894
RollWdthMismatch .......................................................................................................................................... 894
Paper size not detected. ................................................................................................................................. 895
Insufficient paper for job .................................................................................................................................. 896
This paper cannot be used. ............................................................................................................................. 897
Roll printing is selected. .................................................................................................................................. 897
Roll printing is selected, but sheets are loaded. ............................................................................................. 897
The roll is empty. ............................................................................................................................................. 897
Sheet removed. ............................................................................................................................................... 899
Sheet printing is selected. ............................................................................................................................... 899
Regular printing is selected, but a roll is loaded. ............................................................................................ 899
Paper jam. ....................................................................................................................................................... 900
Paper loaded askew. ....................................................................................................................................... 900
Paper cutting failed. ......................................................................................................................................... 901
End of paper feed. ........................................................................................................................................... 902
Rel lever is in wrong position. .......................................................................................................................... 902
Rewinding error. .............................................................................................................................................. 902
Media take-up unit ready. ................................................................................................................................ 902
Turn on the media take-up unit. ...................................................................................................................... 903
Borderless printng not possible. ...................................................................................................................... 903
Papr Type Mismatch
Cause Corrective Action
You tried to print a test pattern for printer adjustment
on several sheets, but sheets of different types of paper
were used. Hold down the Stop button for a second or more to cancel
printing.
When printing a test pattern, use sheets of the same type of
paper.
Lift the Release Lever and load a sheet of the same type of
paper.
(See "Loading and Printing on Sheets.")
→P.8
PaprTypeMismatch
Cause Corrective Action
When the Detect Mismatch menu is
set to Pause, the type of paper loaded
does not match the type specified in
the printer driver. Follow these steps to ensure the paper type matches on the printer and in the
printer driver.
1. Hold down the Stop button for a second or more to cancel printing.
2. Either change the type of paper specified in the printer driver settings or
replace the loaded paper and change the paper type setting on the printer.
(See "Loading and Printing on Rolls.")
→P.3
(See "Loading and Printing on Sheets.") →P.8
Error Message > Messages regarding paper >
iPF815 Papr Type Mismatch
13
893