Canon imagePROGRAF iPF815 - Manual (Page 919)

Cause Corrective Action
The Take-up Reel setting in the printer MAIN MENU
was changed from Enable to Disable, but a print job was
received before the roll was removed. Press the Online button to resume printing.
Turn on the media take-up unit.
Cause Corrective Action
The Media Take-up Unit was off when you selected Enable for Take-up Reel. Turn the Media Take-up Unit on.
Borderless printng not possible.
"Lift release lever and reload the paper."
Cause Corrective Action
Because paper expands or con-
tracts depending on the environ-
ment of use, it may become nar-
rower or wider than the suppor-
ted width for borderless printing. Hold down the Stop button for a second or more to cancel printing.
Use each type of paper only where the recommended environmental conditions are
met. For details on environmental conditions for various paper, see the Paper Ref-
erence Guide.
(See "Types of Paper.")
→P.617
The paper is loaded askew. Lift the Release Lever and straighten the paper so that the edge of the paper is in
the width of the ink groove for borderless printing.
Insert the roll firmly until it touches the flange of the Roll Holder.
(See "Attaching the Roll Holder to Rolls.")
→P.623
If you press the Online button and continue printing, the document will be printed
with a border.
"Check supported paper."
Cause Corrective Action
The print job received specifies a type
or width of paper that is not compatible
with borderless printing. Follow these steps to change the settings of the print job to enable border-
less printing.
1. Hold down the Stop button for a second or more to cancel printing.
2. Make sure the correct printer driver for the printer is selected and try
printing again.
For information on types of paper compatible with borderless printing,
refer to the Paper Reference Guide.
(See "Types of Paper.")
→P.617
If you press the Online button and continue printing, the document will be
printed with a border.
The loaded paper is not compatible with
borderless printing. Hold down the Stop button for a second or more to cancel printing.
If you press the Online button and continue printing, the document will be
printed with a border.
Error Message > Messages regarding paper >
iPF815 Turn on the media take-up unit.
13
903