Canon imagePROGRAF iPF815 - Manual (Page 659)

Cutting Method Menu Settings Driver Setting
Man-
ual
→P.644
(See "Cutting Roll Paper After Printing.")
→P.196
Cutting
Mode Auto Cut Manual No Yes
Print Cut
Guideline
Paper
Cut-
ting
→P.646
Choose this option if you want to cut pages by
pressing Cutter Unit buttons for manual cutting
after printing when the printer driver is config-
ured to Auto Cut > No or Print Cut Guideline.
Otherwise choose this option if you want to cut
the roll edge after loading a roll. Paper
Cutting Yes No Print
Cut
Guideline
Note
• Automatic and Eject are valid only when you have specified Auto Cut > Yes in the printer driver.
• With Eject, printing does not resume after a series of jobs have been printed continuously until the roll is cut.
Cut rolls manually in the following cases:
Eject (waiting for ink to dry after printing)
Important
• When cutting wide printed documents after ejection, have two people support the documents. If the paper
drops, printed documents may be damaged.
• Do not lift the paper when holding printed documents before cutting. If the paper rises, it may affect the
printing quality.
1.
Press the Menu button to display MAIN MENU.
2.
Press ▲ or ▼ to select Paper Details, and then press the ▶ button.
Handling Paper > Handling rolls >
iPF815 Specifying the Cutting Method for Rolls
7
643