Canon imagePROGRAF iPF815 - Manual (Page 925)

Messages regarding printheads
Cannot adjust printhead. ................................................................................................................................. 909
Cannot adjust band. ........................................................................................................................................ 909
PHead needs cleaning. ................................................................................................................................... 910
Wrong printhead. ............................................................................................................................................. 910
Problem with Printhead ................................................................................................................................... 910
Printhead error ................................................................................................................................................ 910
No printhead .................................................................................................................................................... 910
Execute printhead cleaning. ............................................................................................................................ 911
Cannot adjust printhead.
Cause Corrective Action
The Printhead noz-
zles are clogged. Execute Auto Head Adj. again, as follows.
1. Press the Online button to clear the error.
2. Print a test pattern to check the nozzles.
(See "Checking for Nozzle Clogging.")
→P.817
3. Clean the Printhead if the nozzles are clogged.
(See "Cleaning the Printhead.")
→P.819
4. Execute Auto Head Adj. again.
(See "Automatic Straightening of Lines and Colors (Auto Head Adj.).")
→P.668
The Printhead can-
not be aligned; high-
ly transparent film is
loaded. Press the Online button to clear the error.
We recommend using a type of paper that you often use, other than film, for Printhead adjust-
ment.
(See "Automatic Straightening of Lines and Colors (Auto Head Adj.).")
→P.668
The Printhead is in-
stalled crooked. Straighten the Printhead as follows, and then execute Auto Head Adj. again.
1. Press the Online button to clear the error.
2. Use Head Inc. Adj. to adjust the angle of inclination of the Printhead.
(See "Adjusting Line Misalignment (Head Inc. Adj.).")
→P.672
3. Execute Auto Head Adj. again.
(See "Automatic Straightening of Lines and Colors (Auto Head Adj.).")
→P.668
Cannot adjust band.
Cause Corrective Action
The Printhead nozzles are clog-
ged. Execute Auto Band Adj. again, as follows.
1. Press the Online button to clear the error.
2. Print a test pattern to check the nozzles.
(See "Checking for Nozzle Clogging.")
→P.817
3. Clean the Printhead if the nozzles are clogged.
(See "Cleaning the Printhead.")
→P.819
4. Execute Auto Band Adj. again.
(See "Auto Band Adjustment (Auto Band Adj.).")
→P.677
Error Message > Messages regarding printheads >
iPF815 Cannot adjust printhead.
13
909