Canon imagePROGRAF iPF815 - Manual (Page 863)

18.
Close the Top Cover.
19.
Tape down printer covers to secure them, in the reverse order of tape removal during installation.
20.
If the Stationary Output Stacker is installed, reverse the installation procedure to remove the Stationary Output
Stacker.
21.
Remove the Stand by reversing the installation procedure, when it was attached to the printer.
22.
Disassemble and repackage the Stand by following the installation procedure in reverse.
23.
Repack the Roll Holder, Holder Stopper, and printer in shipping materials, and then package them in a shipping box.
Updating the Firmware
Update the printer firmware to take advantage of new and improved printer functions.
Confirming the firmware version
1.
Press the Menu button to display MAIN MENU.
2.
Press ▲ or ▼ to select Information, and then press ▶.
3.
Press ▲ or ▼ to select System Info, and then press the OK button.
The firmware version is displayed.
Maintenance > Other Maintenance >
iPF815 Updating the Firmware
11
847