Canon imagePROGRAF iPF815 - Manual (Page 644)

Loading Rolls in the Printer
Follow these steps to load rolls in the printer.
Note
• Remove any loaded paper that will not be used.
• Rolls (See "Removing the Roll from the Printer.") →P.634
• Sheet (See "Removing Sheets.") →P.656
• If the Platen is dirty, clean inside the Top Cover. (See "Cleaning Inside the Top Cover.") →P.837
• After pressing the Load/Eject button, you can refer to instructions on the Display Screen as you load the
paper. (See "Checking Instructions During Printer Operations.") →P.743
1.
Confirm that a roll is selected as the paper source. (See "Selecting the Paper Source.") →P.631
2.
Open the Top Cover and lift the Ejection Guide.
Handling Paper > Handling rolls >
Loading Rolls in the Printer iPF815
7
628