Canon imagePROGRAF iPF815 MFP M40 - Manual (Page 11)

11
Troubleshooting
The length of printed images is
inaccurate To ensure the feed amount matches the paper size,
select Print Length in Feed Priority in the printer
menu and enter the amount for adjustment in Adjust
Length . In the printer menu, Band Joint is
specified in Feed Priority .
(→"Adjusting the Feed Amount," User Manual)
Phenomenon Cause Corrective Action
The type of paper specified in the
printer driver does not match the
type loaded in the printer.
Make sure the same type of paper is specified in the
printer driver as you have loaded in the printer.
Load paper of the same type as you have specified in
the printer driver.
Hold down the Stop button for a second or more to
cancel printing. 1.
Change the type of paper in the printer driver and
try printing again. 2.
(→ , Loading Rolls in the Printer)
(→ , Loading Sheets in the Printer)
Image Edges are Blurred or White
Banding Occurs Set VacuumStrngth to Weakest .
Lower the Printhead .
Close the blue Switch on the platen so that it matches
the paper size.
The Platen suction is too strong.
The Printhead is set too high.
The type of paper specified in the
printer driver does not match the
type loaded in the printer.
Make sure the same type of paper is specified in the
printer driver as you have loaded in the printer.
Load paper of the same type as you have specified in
the printer driver.
Hold down the Stop button for a second or more to
cancel printing. 1.
Change the type of paper in the printer driver and
try printing again. 2.
(→ , Loading Rolls in the Printer)
(→ , Loading Sheets in the Printer)
The contrast becomes uneven
during printing The paper feed amount is out of
adjustment. Adjust the feed amount.
(→"Adjusting the Feed Amount," User Manual)
Make sure the same type of paper is specified in the
printer driver as you have loaded in the printer.
The type of paper specified in the
printer driver does not match the
type loaded in the printer. Load paper of the same type as you have specified in
the printer driver.
(→
, Loading Rolls in the Printer)
(→ , Loading Sheets in the Printer)
Hold down the Stop button for a second or more to
cancel printing. 1.
Change the type of paper in the printer driver and
try printing again. 2.
You can adjust the feed amount in 0.02% increments.
(→"Main Menu Settings," User Manual)
(→"Adjusting the Vacuum Strength (VacuumStrngth),"
User Manual)
(→"Setting the Blue Switch on the Platen," User
Manual)
(→"Troubleshooting Paper Abrasion and Blurry
Images (Head Height)," User Manual)