Canon imagePROGRAF iPF815 MFP M40 - Manual (Page 45)

45
Error Messages
Error Message Cause Corrective Action
Paper loaded askew. Paper is loaded askew. Follow these steps to reload the roll.
Lift the Release Lever . 1.
Open the Top Cover . 2.
Adjust the right edge of the roll to make it parallel to
the right Paper Alignment Line . 3.
Lower the Release Lever . 4.
If this error recurs after you reload the roll, remove
the Roll Holder from the printer, push the roll firmly in
until it touches the Roll Holder flange, and reload the
Roll Holder in the printer.
Follow these step to reload a sheet.
Lift the Release Lever . 1.
Open the Top Cover . 2.
Adjust the right edge of the sheet to make it parallel
to the right Paper Alignment Line and the trailing
edge of the sheet to make it parallel to the paper
alignment line under the Paper Retainer . 3.
Lower the Release Lever . 4.
To disable this message (if it is displayed repeatedly
despite reloading paper, for example), choose Off or
Loose in the Skew Check Lv. setting of the printer
menu. However, this may cause jams because paper
may be askew when it is printed. Also, the Platen may
become soiled, which may soil the back of the next
document when it is printed.
(→ , Loading Rolls in the Printer)
(→ , Attaching the Roll Holder to Rolls)
(→ , Loading Sheets in the Printer)
Borderless printng not possible.
Paper stretched or shrank. The loaded roll has expanded or
contracted due to environmental
conditions, making it wider or
narrower than the supported width
for borderless printing. Hold down the Stop button for a second or more to
cancel printing.
Use each type of paper only where the recommended
environmental conditions are met. For details on
environmental conditions for various paper, see the
Paper Reference Guide .
(→"Types of Paper," User Manual)
Close the Top Cover . 5.
Close the Top Cover . 5.