Canon imagePROGRAF iPF815 MFP M40 - Manual (Page 20)

20
If Roll Paper Jams
Always move the Carriage to the right side. If the Carriage is on the left, a Carriage error may occur
when you turn on the printer. •
Do not force the roll paper into alignment with the Paper Alignment Line (b). This may prevent the
paper from being advanced straight. •
If you pull out too much of the roll, an excessive amount will be cut away. •
You can ensure that the edge is cut neatly by selecting Paper Cutting in the printer menu. •
(→"Specifying the Cutting Method for Rolls," User Manual)
7
8
9
10
If the Carriage is on the left, move the Carriage to the
right until it stops.
Hold the edge of the roll paper in the middle as you
gently pull it evenly to the position of the Ejection Guide
(a). Align the right side of the roll paper with the Paper
Alignment Line (b), keeping this side parallel to the line,
and then lower the Release Lever .
Close the Top Cover .
Turn the printer on. (→"Turning the Printer On and Off,"
User Manual)
The roll is now advanced. After it is fi nished being
advanced, you can resume printing.
b
a