Canon imagePROGRAF iPF815 MFP M40 - Manual (Page 41)

41
Error Messages
Cannot adjust printhead. The Printhead nozzles are
clogged.
Execute Auto Head Adj. again, as follows.
Press the Online button to clear the error. 1.
Print a test pattern to check the nozzles. 2.
Clean the Printhead if the nozzles are clogged. 3.
Execute Auto Head Adj. again. 4.
The Printhead cannot be aligned;
highly transparent film is loaded. Press the Online button to clear the error.
Maximum jobs stored. 100 jobs are stored in the personal
box. Delete unneeded jobs stored in personal boxes.
(→"Checking for Nozzle Clogging," User Manual)
(→ , If Vertical Lines are Warped or Colors are
Misaligned)
(→ , If Printing is Faint)
(→ , If Vertical Lines are Warped or Colors are
Misaligned)
The Printhead is installed crooked. Straighten the Printhead as follows, and then execute
Auto Head Adj. again.
Use Head Inc. Adj. to adjust the angle of inclination
of the Printhead . 2.
Execute Auto Head Adj. again. 3.
(→"Adjusting Line Misalignment (Head Inc. Adj.),"
User Manual)
(→ , If Vertical Lines are Warped or Colors are
Misaligned)
Cannot print as selected.
Another roll is in use. A printed document remains in
the Output Tray without being cut
and a print job was received that
specifies the other roll. Follow these steps to load the other roll after cutting
the printed document.
Hold down the Stop button for a second or more to
cancel printing.
Cut the printed document.
Load the other roll and resend the print job.
Error Message Cause Corrective Action
Mail box full. Now printing
without saving data. No more space is available on the
printer's hard disk, so jobs are now
printed without saving them. (Print
jobs can no longer be saved on the
hard disk.) After printing, this message is cleared.
We recommend using a type of paper that you often
use, other than film, for Printhead adjustment.
Press the Online button to clear the error. 1.
2.
3.
1.
(→"Specifying the Cutting Method for Rolls," User
Manual)
(→"Loading and Printing on Rolls," User Manual)
(→"Deleting Saved Jobs," User Manual)