Canon imagePROGRAF iPF815 MFP M40 - Manual (Page 40)

40
Error Messages
Error Message Cause Corrective Action
Problem with Printhead The Printhead nozzles are
becoming clogged.
If printing is faint, clean the Printhead .
Wrong printhead. An incompatible Printhead has
been installed. Open the Top Cover and replace the Printhead with a
new one.
PHead needs cleaning. The Printhead nozzles are
clogged.
Press the Online button to resume printing.
Hold down the Stop button for a second or more to
cancel printing.
Clean the Printhead .
(→ , Replacing the Printhead )
Blue platen switch is dirty. The blue Switch on the platen is
dirty. Open the Top Cover and clean the blue Switch on
the platen.
Parts replacement time has
passed. It is past the recommended time
to replace consumables for which
service is required. Contact your Canon dealer for assistance.
(→ , If Paper is Soiled)
Printhead error There is a problem with the
Printhead . Open the Top Cover and replace the Printhead with a
new one.
No printhead No Printhead is installed. Install the Printhead .
(→
, Replacing the Printhead )
(→ , Replacing the Printhead )
1.
2.
Follow these steps to clean the Printhead .
If the message is still displayed after you execute
Head Cleaning B two or three times, contact your
Canon dealer for assistance.
(→ , If Printing is Faint)
(→ , If Printing is Faint)
Execute printhead cleaning. The Printhead nozzles are
clogged. Follow these steps to clean the Printhead .
Hold down the Stop button for a second or more to
cancel printing. 1.
2. Clean the Printhead .
(→ , If Printing is Faint)
If this message is still displayed, replace the
Printhead .
(→
, Replacing the Printhead)