Safety precautions – Canon CR-2 PLUS AF User Manual

Page 10

Advertising
background image

10

2 Safety

Safety Precautions

To prevent injuries and data loss, operate the CR-2 Plus AF correctly by following the safety

precautions.

WARNING

To avoid the risk of electric shock, this equipment must only
be connected to a supply mains with protective earth.

Prohibited

Do not damage the power cord.

t Do not place anything heavy onto the power cord.

t Do not damage or modify the power cord.

t Do not forcibly bend, twist or pull the power cord.

t Do not hold the power cord when removing it from the AC outlet. Be sure to hold

the plug.

t Do not use an extension cable with the power cord. Connect the power cord

directly into the AC outlet.

Handle the power cord carefully. If the cord is damaged, contact your sales

representative or local Canon dealer. A damaged cord may result in fire or electric

shock.

Prohibited

Do not use a multiple socket outlet and an extension cable.

Connect the power cord directly into the AC outlet. Do not use a multiple socket

outlet and an extension cable with it.

Prohibited

Do not disassemble or modify.

A disassembled or modified instrument may result in fire or electric shock. Because

the CR-2 Plus AF incorporates high-voltage parts that may cause electric shocks,

touching them may cause death or serious injury.

Prohibited

Do not leave alcohol, thinner, or any flammable chemicals
near the instrument.

Do not place the CR-2 Plus AF near a flammable solvent. Fire may result if the

solvent spills or evaporates and makes contact with the internal electric parts. Some

disinfectants are flammable. Be sure to take precautions when using them.

Stop using immediately if there is an abnormality or problem.

If an abnormality occurs, immediately turn off the power and
disconnect the plugs on all devices.

t Smoke is emitted

t An unusual smell

t An unusual noise

t Foreign matter gets inside

t Devices are damaged.

Fire or electric shock may result if you continue using in such condition. Immediately

turn off the power of CR-2 Plus AF, unplug the power plug and turn off the power

of all connected devices. Then, contact your sales representative or local Canon

dealer immediately.

Prohibited

Do not place anything on top of the device.

Fire or electric shock may result if water or any other liquid or a needle, paper clip or

any foreign matter gets inside the CR-2 Plus AF.

Advertising